BWF Certifire (certificate no CF297) approved intumescent glazing strip sealant tested to BS476, EN1364 and EN1634 for 30 minutes resistance to the passage of fire in timber doors and screens. Can be used with a wide variety of non insulating and insulating glass types, please consult our product datasheet for further information. Firestrip 30 is very cost effective compared to other rigid/semi-rigid fire resistant materials.
This product also has applications in partitioning and fire rated ductwork, for further information please contact our technical department.
BWF Certifire (certificate no CF297) approved intumescent glazing strip sealant tested to EN1364 and EN1634 for 60 minutes resistance to the passage of fire in timber doors and screens. Tested for use with Pilkington Pyrostop and Pyrodur glass types. Please consult our product datasheet for further information. Firestrip 60 is very cost effective compared to other rigid/semi-rigid fire resistant materials.
Intuglaze is a high quality intumescent acrylic with excellent application characteristics, which can be used for glazing fire-rated glass into timber doors and screens, subject to frame design.
Tested to BS476: Part 22 for 30 minutes integrity.
Please consult our product datasheet for further information.
Intufire Acrylic sealant is a one-part fire-resistant joint sealant which provides a firm, yet flexible seal to joints in a wide variety of fire-rated structures such as door architraves, fire rated ductwork and fire walls where fire resistance up to 4 hours is required. Its special intumescent properties cause the sealant to swell up and char, preventing the spread of smoke and fire through the joint.
Tested to BS476: Part 20 for up to 4 hours.
Please consult our product datasheet for further information.
Firetape Ceramic is a specialised tape based on ceramic fibres which is supplied on single strand reels for use when glazing a wide variety of insulating and non-insulating fire resistant glass types into internal screens and doors manufactured from timber or steel. It has a special pressure sensitive contact adhesive which allows it to be repositioned before final fixing. It can also be capped with Silfix® U9 to prevent possible degradation of the tape by glass cleaning solutions. Please consult our product datasheet for further information.
Conforms to BS476 Part 20.
Single component flame retardant construction foam.
Fills gaps around pipes and service penetrations and seals partition walls where a fire rated foam is required.
Conforms to DIN 4102-part 1 class B1: 1998 and prEN: 1366 Part 4 for periods up to 4 hours fire resistance.
Hodgson Sealants Website Design and Development by NetConstruct